Shenzhen Bede Mold Co., Ltd
One Stop Total Solution Supplier of Injection Mold and Stamping Dies
 |
| Place of Origin: | China |
| Brand Name: | BD |
| Certification: | RoHS |
| Model Number: | BDP0000 |
| Minimum Order Quantity: | 500 pcs |
|---|---|
| Price: | 0.17 USD per piece |
| Packaging Details: | plastic box or PE bags |
| Payment Terms: | D/A, L/C, D/P, T/T, Western Union |
| Supply Ability: | 50000 pieces per week |
| Materials 1: | PA-66 | Materials 2: | Alloy Steel |
|---|---|---|---|
| Color: | Yellow | Size: | φ18 |
| Performance: | Hardwearing | Packing: | 10 Pieces In A Plastic Box |
| High Light: | parting locks mould,parting line locks |
||
Nylon Materials Hardwearing Yellow Color φ18 Mould Parting Locks for Injection Molding
Description
The nylon parting lock is a part that adjusts the friction between the mold and the nylon sleeve by locking the conical bolt. It consists of nylon sleeve and alloy steel bolts two parts, nylon sleeve color has white, yellow, red, blue four kinds.
Mounting method
Parting locks make the mold easy to take off. During the working process, the friction between the mold and resin is adjusted by the inclined screw, and the mould can be closed about 50,000 times by turning about 1/4 circle.
1. Embed the resin sleeve about 3 mm in the movable side of the die plate.
2. Create a hole on the fixed side of the die plate and finish it to reduce the internal surface roughness.
3. In order to maintain the mold parting locks’ durability, please make an R-chamfer instead of a C-chamfer on the inlet edge.
4. There is a PLBS bushing specially designed for being used with this parting lock can help to replace the R-chamfering and surface polishing processes. This kind of mold opening controller’s tapered bolt can be tightened or loosened to adjust the tension.
Quick Details
The materials of the cone bolt is alloy steel, has excellent tensile strength and fatigue resistance, and the screw thread adopts international standards. The nylon sleeves are produced by PA66 and special additives, different colors have the different characteristics.
| materials of bolt | alloy steel | Color | yellow |
| materials of sleeve | PA-66 | Size | φ16 |
| Performence | Wear-resistant | OEM | welcome |
Standard Size
| Size D | H/mm | L/mm | N/mm | M/mm |
| φ16 | 24 | 41 | 13 | 8 |
| φ18 | 29 | 46 | 13 | 8 |
Attention
1. The sleeve of parting locks are used special nylon material, has good wear resistance and heat resistance, although the nylon sleeve heat resistance temperature is 150, but in the actual use process, because of the continuous effect of the locking stress of conical bolts, durability of the nylon sleeve will be reduced, so it general used below 80℃.
2. Do NOT add lubricating oil on nylon sleeve.
Packing and Shipping
The parting locks are packaged with plastic boxes or PE bags as the pictrue show, and customized package is welcome.
About the shipping, all the well-known express companies and ocean shipping can be selected, but in remote areas, we can only use EMS.
MISUMI Standard Guide Pillar And Bush Ra 0.8~1.0 Precision Mold Components
Customized Size Guide Pillar Shoulder Guide Pins And Bushings Without Oil Groove / SGPH
Precision Guide Pillar And Bushing With Oil Groove 20Cr Materials 58~62HRC Hardness
Injection Mold Leader Pins And Bushings / DME Standard Mold Guide Pins And Bushings
Steel 65Mn JIS Standard Mold Spring Painting 350mm Length
Yellow Industrial Light Duty Die Springs Low Load Injection 60Si2MnA Material OD 12mm 14mm
Blue Color Light Load TL Mould Spring 50CrVA Materails Outer Diameter 18mm
Red Heavy Load Mold Spring For Metal Die Casting Dies / Plastic Molds
Nitrided Temperature Resistant Ejector Blade SKD61 Plastic Injection Mold
High Hardness Nitrided Die Ejector Pins SKD61 Injection Molding Pins
Die Casting Ejector Pins Injection Molding SKD61 Diameter 0.8~25mm
Stepped Straight Mold Ejector Pins Die Thimble Injection Molding
